浅谈饮用水消毒中常用的几种方法

对饮用水消毒中常用的几种方法进行了介绍，对这几种方法进行了比较，认为在目前国内的饮用水消毒处理中次氯酸钠发生器消毒是比较好的一种，而紫外线消毒法是今后可能取代传统的化学消毒法并且具有广阔应用前景的一种绿色环保高效的消毒方法。     

高效滤纸测试方法的研究

通过钠焰法、油雾法、DOP法、最易透过粒径法等滤纸测试方法的对比,阐明滤纸测试方法发展的趋势。     

Sharpening polycrystalline phase boundary for potassium sodium niobate ceramics with MnF2 modification

The influence of anion on structure and performance is unclear in potassium sodium niobate ((K,Na)NbO₃; KNN)-based ceramics, while cation doping has been widely researched. Here, the phase structure and electrical properties are explored in MnF₂-doped KNN ceramics. Significantly, sharp rhombohedral–orthorhombic (R–O) and orthorhombic–tetragonal (O–T) phase boundary as well as reduced diffusion degree is exhibited in the ceramics along with little changed phase transition temperatures due to the optimized F⁻ content at O site, which is different from that of cation replacement for A and B sites. Notably, the domain wall motion is facilitated due to the increased A vacancy and decreased O vacancy along with strengthened polarity, originating from the higher valence state and electronegativity of F⁻ with respect to O²⁻. And then, enhanced ferroelectricity is realized via MnF₂ modification, the piezoelectricity is elevated in turn. This work presents a new idea of anion doping for controlling structure and properties in perovskite materials.     

不饱和腙类化合物的三氟甲基化反应

氟具有强的吸电子性、亲脂性,将含氟的取代基引入药物中能显著改变药物的药代动力学性质,包括极性、亲脂性、代谢稳定性等,因此向化合物中引入三氟甲基是近期有机合成及医药领域的热点,开发利用经济、高效、绿色的三氟甲基试剂具有重要的意义。以三氟甲烷亚磺酸钠为三氟甲基源,在温和的条件下实现不饱和腙类化合物的三氟甲基化。结果表明,三氟甲烷亚磺酸钠作为三氟甲基源具有良好的反应活性,反应条件温和,符合绿色化学要求,并提供了向不饱和腙类化合物引入三氟甲基的新方法。     

Cleaning capacity of octenidine as root canal irrigant: A scanning electron microscopy study

The aim of this study was to assess the cleaning capacity of the octenidine hydrochloride (OCT) used as root canal irrigant by scanning electron microscopy (SEM) analysis. Sixty human unirradicular extracted teeth were randomly distributed in 6 groups (n = 10) according to irrigant solutions which were used during root canal preparation: G1, 0.1% OCT; G2, 2% chlorhexidine (CHX); G3, 2.5% sodium hypochlorite (NaOCl); G4, OCT + 17% ethylenediaminetetraacetic acid (EDTA); G5, 2.5% NaOCl + 17% EDTA and G6, distilled water. All specimens were instrumented with ProTaper system up to F4. Teeth were sectioned and prepared for SEM. The smear layer was evaluated using a 5‐score system and the data were analyzed by Kruskal–Wallis and Dunn (α = 0.05). In all root canal thirds there was no significant difference between OCT, CHX, NaOCl, and water groups (p > .05), and these groups showed higher smear layer values than NaOCl + EDTA and OCT + EDTA groups (p < .05). There was no significant difference between NaOCl + EDTA and OCT + EDTA groups (p > .05). It was concluded that OCT used as a single root canal irrigant presented poor cleaning capacity and could be used in association with a final irrigation with EDTA to obtain smear layer removal.     

钠离子交换法从黑云母中提钾及水钠云母的电化学性能

为了解决我国钾资源短缺的问题,从难溶性钾矿物中提取可溶性钾元素的技术需要被进一步研究。以钾含量相对较高的黑云母为研究对象,通过钠离子交换法从黑云母中提取出可溶性钾元素并制备出水钠云母负极材料。在80 ℃的水热反应温度下,钾离子与钠离子发生交换,通过过滤反应液从滤液中获取可溶性钾盐并得到水钠云母负极材料。X-射线衍射结果表明:反应后的云母层状硅酸盐结构未被破坏,8 h内提钾率高达92.3%。通过电化学工作站测定黑云母及提钾后水钠云母的电化学性能,在0.4 A/g电流密度下进行恒流充放电,测得水钠云母负极材料的首次放电比电容为9.8 F/g,较黑云母原矿的电化学性能有明显的提高。     

Role of activated carbon on micropollutans degradation by ionizing radiation

The objective of this study was to analyze the influence of the presence of activated carbon on the degradation of the triiodinated contrast medium diatrizoate (DTZ) by the simultaneous use of gamma radiation and activated carbon. Four commercial activated carbons (Ceca, Witco, Sorbo, and Merck) with different textural and chemical characteristics were used for this purpose. The percentage DTZ removal obtained was considerably higher with the gamma radiation/activated carbon (GM/AC) system than with radiolysis in the absence of activated carbon, and it depended on the specific activated carbon employed. First, we optimized the amount of activated carbon required to maximize the amount of DTZ removed by the GM/AC system (0.06 g). The degradation constants were higher with the GM/AC system than with radiolysis alone, evidencing a synergic effect that favors pollutant removal. This synergic effect is independent of the textural but not the chemical characteristics of the activated carbon, observing a higher synergic activity for carbons with a higher surface content of oxygen, specifically quinone groups. We also highlight that the synergic effect of the activated carbon requires adsorbent–adsorbate electrostatic interaction and is absent when this interaction is hindered.     

Atom transfer radical polymerization (ATRP): A versatile and forceful tool for functional membranes

The progress in atom transfer radical polymerization (ATRP) provides an effective means for the design and preparation of functional membranes. Polymeric membranes with different macromolecular architectures applied in fuel cells, including block and graft copolymers are conveniently prepared via ATRP. Moreover, ATRP has also been widely used to introduce functionality onto the membrane surface to enhance its use in specific applications, such as antifouling, stimuli-responsive, adsorption function and pervaporation. In this review, the recent design and synthesis of advanced functional membranes via the ATRP technique are discussed in detail and their especial advantages are highlighted by selected examples extract the principles for preparation or modification of membranes using the ATRP methodology.     

Efficient loading and entrapment of tamoxifen in human serum albumin based nanoparticulate delivery system by a modified desolvation technique

Herein, the poorly water-soluble drug, Tamoxifen (Tmx), was loaded in the amphipathic matrix of human serum albumin (HSA) nanoparticles by a modified desolvation method. In order to enhance the drug loading (DL) and drug entrapment efficiency (DEE) (<2% and 10%, respectively), ultrasonication of Tmx-HSA mixture was performed prior to desolvation process. Tmx loading and entrapment efficiency were optimized by employment of the response surface methodology (RSM)-central composite design (CCD) of experiments. Under the optimum conditions of 1.59 mg Tmx/ml concentration, 7.76 pH and 5 h incubation of HSA-Tmx, the DL of 6.7% and DEE of 74% are achievable. Particles with the average size of 195 nm, zeta potential of −21 mV and polydispersity index of 0.09 were produced under these conditions. A more sustained Tmx release behavior was observed from polyethylene glycol (PEG) conjugated nanoparticles in comparison to the non-PEGylated ones. The short-term stability investigation showed no alteration in physicochemical properties of nanoparticles at 4 and 37 °C, but small increase in nanoparticles size was observed after three months of storage at room temperature. This is the first report for efficient production of a Tmx delivery system based on HSA nanoparticles.     

核用2.25Cr-1Mo钢在不同环境下的微动磨损性能

目的 研究核用2.25Cr-1Mo钢在不同环境下的微动磨损性能。方法 采用自制的切向微动磨损试验设备,在4种环境(温室RT/大气、RT/水、450℃/大气和450℃/液态钠)下对2.25Cr-1Mo钢进行了切向微动磨损试验。试验参数为：法向载荷20 N,运动频率5 Hz,位移幅值50μm,循环次数10⁵和2×10⁵。试验前,采用维氏硬度仪测量了2.25Cr-1Mo钢在室温和450℃高温下的硬度。试验后,采用Bruker白光干涉显微镜测量了磨痕的三维形貌并获得了截面轮廓和磨损量。采用扫描电子显微镜(SEM)、能谱仪(EDS)分析磨痕表面和横截面的微观形貌以及摩擦化学反应。结果 2.25Cr-1Mo钢在不同环境下表现出不同的磨损性能。450℃液态钠环境下的磨损量最大,大于450℃和室温大气环境下的磨损量;室温水环境下的磨损最小。经过10⁵微动循环后,2.25Cr-1Mo钢在450℃液态钠和室温水环境下表现出最大和最小的磨损率,分别为4.17×10^-6 mm³/(N·m)和0.32×...